Other Attributes
Application
- Periodically, as the work progresses, evaluated from a distance to ensure that desired effect is being produced across the entire surface.
- If installing in a wet environment, the ArmourTone High Humidity Wet Areas specification must be followed.
- Apply a test area in an inconspicuous area to evaluate compatibility.
- Top Coat may be applied over any smooth arm or tone finish.
- For best results apply with Venetian Trowels or bondo blades.
- Apply Top Coat in very thin, even coats.
- Apply using decorative, multi-directional trowel strokes.
- For maximum protection and for a more even appearance apply two or more quotes.
- Allow 2 hours in between coats once the surface is dry to the touch it may be burnished slightly with a clean, dry Venetian trowel to increase shine and smoothness.
Substrate Preparation
Surface must be clean, dry and free of bond-inhibiting materials such as dust, dirt, rust, grease, oil, mildew, fungus, form-release agents or any other contaminants.
Limitations
- Use only on surfaces that are sound, clean, giant free from any residue that may affect the ability of this product to bond to the surface.
- The use of a sealer is recommended in high-moisture or high traffic areas.
- Ambient and surface temperatures must be 40° F (4° C) or higher during application and drying time. Provide supplemental heat and protection from moisture as needed.
- Application in direct sunlight in hot weather may adversely affect aesthetics.
- Do not allow to freeze until completely dry.
- Always wear proper safety equipment, including particle masks, eye protection and gloves when mixing and/or applying this product.
Drying Time
Avoid rain, heavy traffic and cleaning for 48 hours after application. Allow material to dry 3 to 4 hours under normal conditions. High humidity and low temperatures extend drying time.
